Problem sa pokretanjem

Ponekad u poslednje vreme kad pokrenem Mint ne učita mi “okno” i/ili ikone pa moram da ga restartujem pa je sve ok. Generalno nije problem ali zna da zeza. Da li možda neko zna u čemu je problem?

Daj da vidimo ispis od:

cat ~/.xsession-errors

:slight_smile:

/etc/mdm/Xsession: Beginning session setup...
localuser:boni being added to access control list
Script for none started at run_im.
Script for auto started at run_im.
Script for default started at run_im.
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Script for none started at run_im.
Script for auto started at run_im.
Script for default started at run_im.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-J1vaXd
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-J1vaXd
SSH_AUTH_SOCK=/run/user/1000/keyring-J1vaXd/ssh
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-J1vaXd
SSH_AUTH_SOCK=/run/user/1000/keyring-J1vaXd/ssh
GPG_AGENT_INFO=/run/user/1000/keyring-J1vaXd/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-J1vaXd
SSH_AUTH_SOCK=/run/user/1000/keyring-J1vaXd/ssh
GPG_AGENT_INFO=/run/user/1000/keyring-J1vaXd/gpg:0:1
=== xinerama setup Configuration ===
  Clone: false
  Output: Laptop attached to LVDS1
     status: on
     width: 1366
     height: 768
     rate: 60
     primary: true
     position: 0 0
  Output: (null) attached to VGA1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DP1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to VIRTUAL1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
=== auto-configure - xinerama mode Configuration ===
  Clone: false
  Output: Laptop attached to LVDS1
     status: on
     width: 1366
     height: 768
     rate: 60
     primary: true
     position: 0 0
  Output: (null) attached to VGA1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DP1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to VIRTUAL1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
=== Applying Configuration Configuration ===
  Clone: false
  Output: Laptop attached to LVDS1
     status: on
     width: 1366
     height: 768
     rate: 60
     primary: true
     position: 0 0
  Output: (null) attached to VGA1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to HDMI1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DP1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to VIRTUAL1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1

(cinnamon-settings-daemon:3651): media-keys-plugin-WARNING **: Grab failed for some keys, another application may already have access the them.
Window manager warning: Log level 16: g_object_set_valist: object class 'ClutterSettings' has no property named 'window-scaling-factor'
Starting Dropbox...nm-applet-Message: using fallback from indicator to GtkStatusIcon
      JS LOG: About to start Cinnamon

** (nemo:3879): WARNING **: Can not get _NET_WORKAREA

** (nemo:3879): WARNING **: Can not determine workarea, guessing at layout
Dropbox isn't running!
Done!
conky: нисам пронашао процес
Conky: use_spacer should have an argument of left, right, or none.  'yes' seems to be some form of 'true', so defaulting to right.
Conky: desktop window (9d) is root window
Conky: window type - normal
Conky: drawing to created window (0x2000002)
Conky: drawing to double buffer
Conky: forked to background, pid is 4493

Conky: desktop window (9d) is root window
Conky: window type - normal
Conky: drawing to created window (0x2200002)
Conky: drawing to double buffer
Window manager warning: Trying to remove non-existent custom keybinding "magnifier-zoom-in".
Window manager warning: Trying to remove non-existent custom keybinding "magnifier-zoom-out".
      JS LOG: Cinnamon started at Sun Dec 21 2014 08:17:37 GMT+0100 (CET)

(cinnamon:3858): St-CRITICAL **: st_widget_get_theme_node called on the widget [0x37947d0 StBoxLayout.menu-selected-app-box] which is not in the stage.
      JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
      JS LOG: network applet: Found connection for active

(mintUpdate.py:4544): libglade-WARNING **: unknown attribute `swapped' for .

(mintUpdate.py:4544): libglade-WARNING **: unknown attribute `swapped' for .

(mintUpdate.py:4544): libglade-WARNING **: unknown attribute `swapped' for .

(mintUpdate.py:4544): libglade-WARNING **: unknown attribute `swapped' for .

(gnome-terminal:5473): GLib-GIO-CRITICAL **: g_settings_get: the format string may not contain '&' (key 'monospace-font-name' from schema 'org.gnome.desktop.interface'). This call will probably stop working with a future version of glib.
[0x9be118] main libvlc: VLC је покренут са подразумеваним интерфејсом. Команда „cvlc“ отвара VLC без интерфејса.
Window manager warning: Log level 8: g_main_context_find_source_by_id: assertion 'source_id > 0' failed
Window manager warning: Log level 16: STACK_OP_ADD: window 0x2e00003 already in stack
Window manager warning: Log level 16: STACK_OP_ADD: window 0x2e00003 already in stack
"sni-qt/20984" WARN  08:51:22.246 void StatusNotifierItemFactory::connectToSnw() Invalid interface to SNW_SERVICE 
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f18c0001248] main vout display error: Failed to resize display

(cinnamon:3858): Clutter-CRITICAL **: clutter_actor_remove_child: assertion 'child->priv->parent != NULL' failed
Window manager warning: Log level 8: g_main_context_find_source_by_id: assertion 'source_id > 0' failed

Hmm, ne bih znao baš tačno, ali deluje na moguć problem sa drajverom za grafiku :slight_smile:

Koja je u pitanju i koji drajver?

inxi -Gxxx
#ako nemaš inxi, instaliraj ga prvo

Graphics: Card: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected]
GLX Renderer: Mesa DRI Intel Ivybridge Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes

Od sinoć više neče ikone na pozadini da mi učita… :frowning:

Instalirao sam LM 17.1 pre nešto manje od nedelju dana i tek danas se opet pojavio isti problem da neće da mi pokrene Cinnamon kako treba. S time da mi je conky prijavio neki proces mdmwebkit koji zauzima nekih 200MB rama dok ga ovako ne mogu naći. Je li to to punjenje rama kome nema leka?

Ima, promeni temu @mdm* sa postojeće webkit/html varijante, na klasičnu ( nemam Mint pri ruci da preciznije napišem, Guglaj ako se ne snađeš ). :slight_smile:

  • Login screen @Preferences/Settings/System kategorija :slight_smile:

Ok, promenio sam i zasad je sve u redu!

Od danas opet nešto ne valja! Ništa nisam bitno menjao jutros ali iz nekog razloga kada se ulogujem baš je dugo crn ekran. Skoro minut je potrebno da sačekam da proradi!

Ja sam sinoc primetio neke anomalije, tipa nije mi se videla ikonica Deluge-a u task bar-u, na Youtube su nestali beli tasteri “play”, “volume”…

@lordbonislav
Šta kaže ispis od:

cat ~/.xsession-errors

:slight_smile:

[CODE]/etc/mdm/Xsession: Beginning session setup…
localuser:boni being added to access control list
Script for none started at run_im.
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Script for none started at run_im.
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-SnWy2E
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-SnWy2E
GPG_AGENT_INFO=/run/user/1000/keyring-SnWy2E/gpg:0:1
SSH_AUTH_SOCK=/run/user/1000/keyring-SnWy2E/ssh
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-SnWy2E
GPG_AGENT_INFO=/run/user/1000/keyring-SnWy2E/gpg:0:1
GNOME_KEYRING_CONTROL=/run/user/1000/keyring-SnWy2E
GPG_AGENT_INFO=/run/user/1000/keyring-SnWy2E/gpg:0:1
SSH_AUTH_SOCK=/run/user/1000/keyring-SnWy2E/ssh
=== xinerama setup Configuration ===
Clone: false
Output: Laptop attached to LVDS1
status: on
width: 1366
height: 768
rate: 60
primary: true
position: 0 0
Output: (null) attached to VGA1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to HDMI1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to DP1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to VIRTUAL1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
=== auto-configure - xinerama mode Configuration ===
Clone: false
Output: Laptop attached to LVDS1
status: on
width: 1366
height: 768
rate: 60
primary: true
position: 0 0
Output: (null) attached to VGA1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to HDMI1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to DP1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to VIRTUAL1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
=== Applying Configuration Configuration ===
Clone: false
Output: Laptop attached to LVDS1
status: on
width: 1366
height: 768
rate: 60
primary: true
position: 0 0
Output: (null) attached to VGA1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to HDMI1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to DP1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Output: (null) attached to VIRTUAL1
status: off
width: -1
height: -1
rate: -1
primary: false
position: -1 -1
Cjs-Message: JS LOG: About to start Cinnamon
nm-applet-Message: using fallback from indicator to GtkStatusIcon

** (nemo:2258): WARNING **: Can not determine workarea, guessing at layout
Window manager warning: Trying to remove non-existent custom keybinding “magnifier-zoom-in”.
Window manager warning: Trying to remove non-existent custom keybinding “magnifier-zoom-out”.
Cjs-Message: JS LOG: Cinnamon started at Sun Aug 16 2015 19:18:24 GMT+0200 (CEST)
Cjs-Message: JS LOG: network applet: Cannot find connection for active (or connection cannot be read)
failed to create drawable
Cjs-Message: JS LOG: network applet: Found connection for active
conky: нисам пронашао процес
Conky: use_spacer should have an argument of left, right, or none. ‘yes’ seems to be some form of ‘true’, so defaulting to right.
Conky: forked to background, pid is 2335
Conky: desktop window (1600028) is subwindow of root window (9d)
Conky: window type - normal
Conky: drawing to created window (0x2400002)
Conky: drawing to double buffer

Conky: desktop window (1600028) is subwindow of root window (9d)
Conky: window type - normal
Conky: drawing to created window (0x2600002)
Conky: drawing to double buffer
mintUpdate: нисам пронашао процес

(mintUpdate.py:2351): libglade-WARNING **: unknown attribute `swapped’ for .

(mintUpdate.py:2351): libglade-WARNING **: unknown attribute `swapped’ for .

(mintUpdate.py:2351): libglade-WARNING **: unknown attribute `swapped’ for .

(mintUpdate.py:2351): libglade-WARNING *: unknown attribute `swapped’ for .
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn’t happen!
Using PPAPI flash.
[2384:2384:0816/191902:ERROR:url_pattern_set.cc(240)] Invalid url pattern: chrome://print/

[2384:2431:0816/191911:ERROR:cert_verify_proc_nss.cc(886)] CERT_PKIXVerifyCert for webmail.ptt.rs failed err=-8172
[WARNING:flash/platform/pepper/pep_module.cpp(63)] SANDBOXED
Vector smash protection is enabled.
[WARNING:flash/platform/pepper/pep_module.cpp(63)] SANDBOXED

(gnome-terminal:2965): GLib-GIO-CRITICAL **: g_settings_get: the format string may not contain ‘&’ (key ‘monospace-font-name’ from schema ‘org.gnome.desktop.interface’). This call will probably stop working with a future version of glib.
[/CODE]