Problem sa zvukom!

Pozdrav svima,instalirao sam novi mint 18.3 sylvia ali sam izgubio sam zvuk i ne znam ga vratiti.Kucao sam razne komande koje sam nalazio na forumima ali ništa nije pomoglo.Verovatno nije bilo za moju zvučnu kartu na matičnoj.Moja konfiguracija je:
System: Host: dallboy Kernel: 4.15.0-12-generic x86_64 (64 bit gcc: 7.3.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: Mobo: Gigabyte model: H67MA-USB3-B3
Bios: Award v: F8 date: 03/26/2012
CPU: Dual core Intel Core i3-2120 (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 13170
clock speeds: max: 3300 MHz 1: 1596 MHz 2: 1596 MHz 3: 1596 MHz
4: 1596 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Curacao XT [Radeon R7 370 / R9 270X/370 OEM]
bus-ID: 01:00.0
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: [email protected]
GLX Renderer: AMD PITCAIRN (DRM 2.50.0 / 4.15.0-12-generic, LLVM 5.0.0)
GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
Audio: Card-1 Intel 6 Series/C200 Series Family High Definition Audio Controller
bus-ID: 00:1b.0
Card-2 Advanced Micro Devices [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
bus-ID: 01:00.1
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 port: de00 bus-ID: 03:00.0
IF: enp3s0 state: up speed: 100 Mbps duplex: full mac:
Drives: HDD Total Size: 560.2GB (1.7% used)
ID-1: /dev/sda model: KINGSTON_SV300S3 size: 120.0GB
ID-2: /dev/sdb model: ST3320620AS size: 320.1GB
ID-3: /dev/sdc model: ST380817AS size: 80.0GB
ID-4: /dev/sdd model: ST340014AS size: 40.0GB
Partition: ID-1: / size: 17G used: 7.2G (46%) fs: ext4 dev: /dev/sdd1
ID-2: swap-1 size: 1.02GB used: 0.00GB (0%) fs: swap dev: /dev/sdd6
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: 34.0
Info: Processes: 185 Uptime: 1:14 Memory: 1291.8/7959.9MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
Hvala na pomoći!

koliko ja vidim ti imaš drajver za audio i za hdmi, da li si pogledao u podešavanja sistema - zvuk, da li tamo izgleda kao kod mene

Kod mene je crven evo pogledaj kako izgledaju sva četiri taba

2 tab ti je za mikrofon i kameru, 4 za aplikacije, da li si nešto uklanjao npr pulseaudio-module-x11, pulseaudio, Gstremer0.10-pulseaudio, Gstremer1.0-pulseaudio? da li si možda povezao TV na svoj kompjuter preko HDMI kabla? pa vidi da nije možda ostao na TV zvuk,

Ne,nisam povezao sa TV-om ali zbog problema sa tastaturom logiech g15 kucao sam komandu “sudo apt remove fwupd” i sa tastaturom nemam problem ali nemam sada zvuk pa ne mogu gledati strimove na vlc plejeru (mislim mogu gledati al ne čujem ništa).Kako da reinstaliram zvučnu karticu?

da li si pogledao ovo Ubuntu 16.04 Cannot Use USB Audio: fwupd Bug
The problem turned out to be more complicated than originally thought and kept re-appearing on reboot.
Thanks a lot to @nakasya for pointing out that it’s a bug in fwupd that appeared when upgrading to Ubuntu 16.04. Refer to Problems with Audio device (ALC-889) - Ubuntu 16.04 .
The temporary workaround until the fix is included in the main release is to run “sudo killall fwupd” and reconnect the USB audio device.
jer što se tiče tog fwupd to je kod mene instalirano

Ne pomaže kucao sam komande “sudo killall fwupd” i “sudo apt remove fwupd” pa restartovao pa instalirao u menadžeru kao kod tebe ali sve je isto.Mislim da nije uspelo jer meni zvučnik i slušalice nisu na usb nego na onaj 3,5 mm džek.

Sada jedino što mi pada napamet je da probaš da instaliraš fwupd i fwupdata i da restartuješ i da probaš da ažururaš driver i da ideš na ažururanje softvera. Sada mislim kada si uklonio fwupd da je on vratio drajver za zvuk na neki početni drajver koji tebi ne odgovara

ne pomaže ni to sa fwupd i fwupdata.Možda da ga ponovo instaliram pa se pojavi a taman sam ga podesio onako po svom.Probaću još malo da proguglam.Hvala u svakom slučaju na brzoj pomoći.

Uspeo sam!!!Sad sam pokrenuo update menager i ponudio mi neki kernel da instaliram a bio je crvenkaste boje oznake broj 4.Ko velim nemam šta da izgubim (pretpostavio sam da je rizičan) i instaliram i kad sam restarovao voila eto ga zvuk. leva kartica mi ne radi (to ne znam šta je)u sredini slušalice su OK i kroz desna kartica su zvučnici i oni rade OK.
Hvala svima a ponajviše Knezu!

Nakon fresh instalacije ne radi zvuk, evo ispisa:

[CODE]aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 3
HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
HDA Intel HDMI, HDMI 4
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample mixing device
dmix:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample mixing device
dmix:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample mixing device
dmix:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Direct sample mixing device
dmix:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=9
HDA Intel HDMI, HDMI 3
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=10
HDA Intel HDMI, HDMI 4
Hardware device with all software conversions
sysdefault:CARD=PCH
HDA Intel PCH, 92HD91BXX Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
Hardware device with all software conversions
[email protected]:~$ alsamixer
[email protected]:~$ pacmd list sinks
Memory blocks currently allocated: 16, size: 215,6 KiB.
Memory blocks allocated during the whole lifetime: 3431775, size: 465,0 MiB.
Memory blocks imported from other processes: 15, size: 151,7 KiB.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
Memory blocks of type POOL: 1 allocated/1894066 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/1659 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/969629 accumulated.
Memory blocks of type IMPORTED: 15 allocated/568080 accumulated.
28 module(s) loaded.
index: 0
name:
argument: <>
used: -1
load once: yes
properties:
module.author = “Lennart Poettering”
module.description = “Automatically restore the volume/mute state of devices”
module.version = “11.1”
index: 1
name:
argument: <>
used: -1
load once: yes
properties:
module.author = “Lennart Poettering”
module.description = “Automatically restore the volume/mute/device state of streams”
module.version = “11.1”
index: 2
name:
argument: <>
used: -1
load once: yes
properties:
module.author = “Lennart Poettering”
module.description = “Automatically restore profile of cards”
module.version = “11.1”
index: 3
name:
argument: <>
used: -1
load once: yes
properties:
module.author = “Lennart Poettering”
module.description = “Augment the property sets of streams with additional static information”
module.version = “11.1”
index: 4
name:
argument: <>
used: -1
load once: no
properties:

index: 5
name: <module-switch-on-connect>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Michael Terry"
    module.description = "When a sink/source is added, switch to it or conditionally switch to it"
    module.version = "11.1"
index: 6
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "Detect available audio hardware and load matching drivers"
    module.version = "11.1"
index: 7
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_03.0" card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
used: 0
load once: no
properties:
    module.author = "Lennart Poettering"
    module.description = "ALSA Card"
    module.version = "11.1"
index: 8
name: <module-alsa-card>
argument: <device_id="1" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
used: 1
load once: no
properties:
    module.author = "Lennart Poettering"
    module.description = "ALSA Card"
    module.version = "11.1"
index: 9
name: <module-bluetooth-policy>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Frédéric Dalleau, Pali Rohár"
    module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
    module.version = "11.1"
index: 10
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
    module.author = "João Paulo Rechi Vita"
    module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
    module.version = "11.1"
index: 11
name: <module-bluez5-discover>
argument: <>
used: -1
load once: yes
properties:
    module.author = "João Paulo Rechi Vita"
    module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
    module.version = "11.1"
index: 12
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
    module.author = "Lennart Poettering"
    module.description = "Native protocol (UNIX sockets)"
    module.version = "11.1"
index: 13
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the default sink and source"
    module.version = "11.1"
index: 14
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
    module.version = "11.1"
index: 15
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Colin Guthrie"
    module.description = "Always keeps at least one sink loaded even if it's a null one"
    module.version = "11.1"
index: 16
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically set device of streams based on intended roles of devices"
    module.version = "11.1"
index: 17
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "When a sink/source is idle for too long, suspend it"
    module.version = "11.1"
index: 18
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "Create a client for each ConsoleKit session of this user"
    module.version = "11.1"
index: 19
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "Create a client for each login session of this user"
    module.version = "11.1"
index: 20
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
    module.version = "11.1"
index: 21
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Lennart Poettering"
    module.description = "Mute & cork streams with certain roles while others exist"
    module.version = "11.1"
index: 22
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Colin Guthrie"
    module.description = "Detect when various filters are desirable"
    module.version = "11.1"
index: 23
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
    module.author = "Colin Guthrie"
    module.description = "Load filter sinks automatically when needed"
    module.version = "11.1"
index: 24
name: <module-x11-publish>
argument: <display=:0.0>
used: -1
load once: no
properties:
    module.author = "Lennart Poettering"
    module.description = "X11 credential publisher"
    module.version = "11.1"
index: 25
name: <module-x11-cork-request>
argument: <display=:0.0>
used: -1
load once: no
properties:
    module.author = "Lennart Poettering"
    module.description = "Synthesize X11 media key events when cork/uncork is requested"
    module.version = "11.1"
index: 26
name: <module-x11-xsmp>
argument: <display=:0.0 session_manager=local/host:@/tmp/.ICE-unix/1606,unix/host:/tmp/.ICE-unix/1606>
used: -1
load once: no
properties:
    module.author = "Lennart Poettering"
    module.description = "X11 session management"
    module.version = "11.1"
index: 27
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
    module.author = "Lennart Poettering"
    module.description = "Command line interface protocol (UNIX sockets)"
    module.version = "11.1"

1 sink(s) available.

  • index: 0
    name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9039
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
    balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 1
    configured latency: 0,00 ms; range is 0,50 … 371,52 ms
    card: 1 <alsa_card.pci-0000_00_1b.0>
    module: 8
    properties:
    alsa.resolution_bits = “16”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “92HD91BXX Analog”
    alsa.id = “92HD91BXX Analog”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0
    alsa.device = “0”
    alsa.card = “1”
    alsa.card_name = “HDA Intel PCH”
    alsa.long_card_name = “HDA Intel PCH at 0xd0734000 irq 34”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:1b.0”
    sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card1”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “8c20”
    device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
    device.form_factor = “internal”
    device.string = “front:1”
    device.buffering.buffer_size = “65536”
    device.buffering.fragment_size = “32768”
    device.access_mode = “mmap+timer”
    device.profile.name = “analog-stereo”
    device.profile.description = “Analog Stereo”
    device.description = “Built-in Audio Analog Stereo”
    alsa.mixer_name = “IDT 92HD91BXX”
    alsa.components = “HDA:111d76e0,103c2109,00100303”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    ports:
    analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
    properties:

    analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
        properties:
            device.icon_name = "audio-speakers"
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
        properties:
            device.icon_name = "audio-headphones"
    

    active port:
    2 source(s) available.
    index: 0
    name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
    driver: <module-alsa-card.c>
    flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 1030
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
    balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 371,52 ms
    monitor_of: 0
    card: 1 <alsa_card.pci-0000_00_1b.0>
    module: 8
    properties:
    device.description = “Monitor of Built-in Audio Analog Stereo”
    device.class = “monitor”
    alsa.card = “1”
    alsa.card_name = “HDA Intel PCH”
    alsa.long_card_name = “HDA Intel PCH at 0xd0734000 irq 34”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:1b.0”
    sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card1”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “8c20”
    device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
    device.form_factor = “internal”
    device.string = “1”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”

  • index: 1
    name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9039
    volume: front-left: 10387 / 16% / -48,00 dB, front-right: 10387 / 16% / -48,00 dB
    balance 0,00
    base volume: 6554 / 10% / -60,00 dB
    volume steps: 65537
    muted: yes
    current latency: 0,00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 371,52 ms
    card: 1 <alsa_card.pci-0000_00_1b.0>
    module: 8
    properties:
    alsa.resolution_bits = “16”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “92HD91BXX Analog”
    alsa.id = “92HD91BXX Analog”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0
    alsa.device = “0”
    alsa.card = “1”
    alsa.card_name = “HDA Intel PCH”
    alsa.long_card_name = “HDA Intel PCH at 0xd0734000 irq 34”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:1b.0”
    sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card1”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “8c20”
    device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
    device.form_factor = “internal”
    device.string = “front:1”
    device.buffering.buffer_size = “65536”
    device.buffering.fragment_size = “32768”
    device.access_mode = “mmap+timer”
    device.profile.name = “analog-stereo”
    device.profile.description = “Analog Stereo”
    device.description = “Built-in Audio Analog Stereo”
    alsa.mixer_name = “IDT 92HD91BXX”
    alsa.components = “HDA:111d76e0,103c2109,00100303”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    ports:
    analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = “audio-input-microphone”
    analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
    properties:
    device.icon_name = “audio-input-microphone”
    analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
    properties:

    active port:
    7 client(s) logged in.
    index: 0
    driver: <module-systemd-login.c>
    owner module: 19
    properties:
    application.name = “Login Session c2”
    systemd-login.session = “c2”
    index: 1
    driver: <protocol-native.c>
    owner module: 12
    properties:
    application.name = “Xfce volume daemon”
    native-protocol.peer = “UNIX socket client”
    native-protocol.version = “32”
    application.process.id = “1674”
    application.process.user = “host”
    application.process.host = “host”
    application.process.binary = “xfce4-volumed”
    window.x11.display = “:0.0”
    application.language = “en_US.UTF-8”
    application.process.machine_id = “0be4b885ddb347e5bc70559303dca99f”
    application.process.session_id = “c2”
    index: 5
    driver: <module-x11-xsmp.c>
    owner module: 26
    properties:
    application.name = “XSMP Session on xfce4-session as 234268386-99d3-4d4d-b7a4-51cfc672038c”
    xsmp.vendor = “xfce4-session”
    xsmp.client.id = “234268386-99d3-4d4d-b7a4-51cfc672038c”
    index: 6
    driver: <protocol-native.c>
    owner module: 12
    properties:
    application.name = “xfce4-pulseaudio-plugin”
    native-protocol.peer = “UNIX socket client”
    native-protocol.version = “32”
    application.version = “0.4.1”
    application.id = “org.xfce.pulseaudio-plugin”
    application.icon_name = “multimedia-volume-control”
    application.process.id = “1770”
    application.process.user = “host”
    application.process.host = “host”
    application.process.binary = “wrapper-2.0”
    application.language = “en_US.UTF-8”
    window.x11.display = “:0.0”
    application.process.machine_id = “0be4b885ddb347e5bc70559303dca99f”
    application.process.session_id = “c2”
    index: 12
    driver: <protocol-native.c>
    owner module: 12
    properties:
    application.name = “Firefox”
    native-protocol.peer = “UNIX socket client”
    native-protocol.version = “32”
    application.icon_name = “firefox”
    application.version = “64.0”
    application.process.id = “2999”
    application.process.user = “host”
    application.process.host = “host”
    application.process.binary = “firefox”
    application.language = “en_US.UTF-8”
    window.x11.display = “:0.0”
    application.process.machine_id = “0be4b885ddb347e5bc70559303dca99f”
    application.process.session_id = “c2”
    index: 13
    driver: <protocol-native.c>
    owner module: 12
    properties:
    application.name = “AudioIPC Server”
    native-protocol.peer = “UNIX socket client”
    native-protocol.version = “32”
    application.process.id = “2999”
    application.process.user = “host”
    application.process.host = “host”
    application.process.binary = “firefox”
    application.language = “en_US.UTF-8”
    window.x11.display = “:0.0”
    application.process.machine_id = “0be4b885ddb347e5bc70559303dca99f”
    application.process.session_id = “c2”
    application.icon_name = “firefox”
    index: 17
    driver: <cli.c>
    owner module: 27
    properties:
    application.name = “UNIX socket client”
    2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_00_03.0>
    driver: <module-alsa-card.c>
    owner module: 7
    properties:
    alsa.card = “0”
    alsa.card_name = “HDA Intel HDMI”
    alsa.long_card_name = “HDA Intel HDMI at 0xd0730000 irq 35”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:03.0”
    sysfs.path = “/devices/pci0000:00/0000:00:03.0/sound/card0”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “0c0c”
    device.product.name = “Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller”
    device.form_factor = “internal”
    device.string = “0”
    device.description = “Built-in Audio”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    profiles:
    output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: no)
    output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: no)
    output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: no)
    output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: no)
    output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: no)
    output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: no)
    output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: no)
    output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: no)
    output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: no)
    output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: no)
    output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 100, available: no)
    output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 100, available: no)
    output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5200, available: no)
    output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 100, available: no)
    output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 100, available: no)
    off: Off (priority 0, available: unknown)
    active profile:
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = “video-display”
    hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
    properties:
    device.icon_name = “video-display”
    hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
    properties:
    device.icon_name = “video-display”
    hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
    properties:
    device.icon_name = “video-display”
    hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
    properties:
    device.icon_name = “video-display”
    index: 1
    name: <alsa_card.pci-0000_00_1b.0>
    driver: <module-alsa-card.c>
    owner module: 8
    properties:
    alsa.card = “1”
    alsa.card_name = “HDA Intel PCH”
    alsa.long_card_name = “HDA Intel PCH at 0xd0734000 irq 34”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:1b.0”
    sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card1”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “8c20”
    device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
    device.form_factor = “internal”
    device.string = “1”
    device.description = “Built-in Audio”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    profiles:
    input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
    output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
    output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: output:analog-stereo+input:analog-stereo
    sinks:
    alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
    sources:
    alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
    alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
    ports:
    analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = “audio-input-microphone”
    analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
    properties:
    device.icon_name = “audio-input-microphone”
    analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
    properties:

    analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
        properties:
       
    analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
        properties:
            device.icon_name = "audio-speakers"
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
        properties:
            device.icon_name = "audio-headphones"
    

1 sink input(s) available.
index: 265
driver: <protocol-native.c>
flags: START_CORKED
state: CORKED
sink: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo>
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 70,61 ms
requested latency: 25,01 ms
sample spec: float32le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: copy
module: 12
client: 13
properties:
media.name = “AudioStream”
application.name = “AudioIPC Server”
native-protocol.peer = “UNIX socket client”
native-protocol.version = “32”
application.process.id = “2999”
application.process.user = “host”
application.process.host = “host”
application.process.binary = “firefox”
application.language = “en_US.UTF-8”
window.x11.display = “:0.0”
application.process.machine_id = “0be4b885ddb347e5bc70559303dca99f”
application.process.session_id = “c2”
application.icon_name = “firefox”
module-stream-restore.id = “sink-input-by-application-name:AudioIPC Server”
0 source output(s) available.
0 cache entrie(s) available.
[email protected]:~$ speaker-test -Dplug:front -c2 -l5 -twav

speaker-test 1.1.3

Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Playback open error: -2,No such file or directory
[email protected]:~$ speaker-test -c2 -l5 -twav

speaker-test 1.1.3

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
Time per period = 3,031769
0 - Front Left
1 - Front Right
Time per period = 3,031639
0 - Front Left
1 - Front Right
Time per period = 3,031907
0 - Front Left

1 - Front Right
Time per period = 3,030304
0 - Front Left
1 - Front Right
Time per period = 3,029938
[email protected]:~$ [/CODE]

Prilikom testiranja se čulo ovo Front Left i Front Right.

UPDATE:
Proradio, nisam siguran kako, ali nema veze. Bitno je da radi. :smiley: